initscripts - The inittab file and the /etc/init.d scripts
Website: | https://github.com/fedora-sysv/initscripts |
---|---|
License: | GPLv2 and GPLv2+ |
Vendor: | Red Hat, Inc. |
- Description:
The initscripts package contains the basic system scripts used to boot your Red Hat or Fedora system, change runlevels, and shut the system down cleanly. Initscripts also contains the scripts that activate and deactivate most network interfaces.
Packages
initscripts-9.03.61-1.el6.src [2.8 MiB] |
Changelog
by David Kaspar [Dee'Kej] (2018-04-27):
- Move Source & URL to Github |
initscripts-9.03.58-1.el6_9.2.src [1.6 MiB] |
Changelog
by David Kaspar [Dee'Kej] (2017-09-13):
- ARPUPDATE option introduced to resolve BZ #1440888 |
initscripts-9.03.58-1.el6_9.1.src [1.6 MiB] |
Changelog
by David Kaspar [Dee'Kej] (2017-04-25):
- regression in commit a2ecd685d60 fixed [start $vpninterfaces] |
initscripts-9.03.58-1.el6.src [1.6 MiB] |
Changelog
by David Kaspar [Dee'Kej] (2017-01-18):
- regression in commit bab72274889 fixed [missing $() for DAD detection] |
initscripts-9.03.53-1.el6_8.2.src [1.6 MiB] |
Changelog
by David Kaspar [Dee'Kej] (2017-02-09):
- fix ifdown with 'lo' (loopback) alias (bug #1420053) |
initscripts-9.03.53-1.el6_8.1.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2016-06-13):
- spec: we need newer lvm |
initscripts-9.03.53-1.el6.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2016-04-12):
- functions: parse -d first |
initscripts-9.03.49-1.el6_7.5.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2016-03-08):
- init.d/halt: give init some time to reexecute |
initscripts-9.03.49-1.el6_7.4.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2016-01-22):
- ifdown-eth: fix comparison |
initscripts-9.03.49-1.el6_7.3.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2015-11-10):
- ifdown: clean ipv4 localhost addresses |
initscripts-9.03.49-1.el6_7.2.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2015-10-16):
- ifup-wireless: fix calling of phy_wireless_device |
initscripts-9.03.49-1.el6_7.1.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2015-08-13):
- rc.sysinit: apply quotas after system is relabeled |
initscripts-9.03.49-1.el6.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2015-04-09):
- network-functions: fix change_resolv_conf after grep update |
initscripts-9.03.46-1.el6_6.1.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2014-10-24):
- ifup: also set multicast_snooping after the bridge is up |
initscripts-9.03.46-1.el6.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2014-07-22):
- ifup,vlan: fix typo |
initscripts-9.03.40-2.el6_5.4.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2014-08-26):
- bonding: match whole name of interface |
initscripts-9.03.40-2.el6_5.3.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2014-07-07):
- network-functions: ETHTOOL_DELAY introduction patch |
initscripts-9.03.40-2.el6_5.2.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn - 9.03.40-2.2 (2014-06-24):
- hotplug: don't call ifup when new vlan appears |
initscripts-9.03.40-2.el6_5.1.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2014-01-20):
- init.d/functions: add -b optin to status and killproc |
initscripts-9.03.40-2.el6.src [1.6 MiB] |
Changelog
by Lukas Nykryn (2013-10-10):
- fix duplicit then (#1015065) |
initscripts-9.03.38-1.el6_4.5.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2014-07-07):
- network-functions: ETHTOOL_DELAY introduction patch |
initscripts-9.03.38-1.el6_4.4.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn - 9.03.38-1.4 (2014-06-24):
- hotplug: don't call ifup when new vlan appears |
initscripts-9.03.38-1.el6_4.2.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2013-07-24):
- bonding: set master up before slaves (#987998) |
initscripts-9.03.38-1.el6_4.1.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2013-03-07):
- fix greps to correctly handle comments and quotation (#919086) |
initscripts-9.03.38-1.el6.src [1.6 MiB] |
Changelog
by Lukáš Nykrýn (2013-01-09):
- call ip link up on master after slaves are up (#893395) |
initscripts-9.03.31-2.el6_3.1.src [1.5 MiB] |
Changelog
by Václav Pavlín (2012-09-06):
- be less strict about VLAN name (#854852) |
initscripts-9.03.31-2.el6.src [1.5 MiB] |
Changelog
by Bill Nottingham (2012-05-23):
- fix the NIS domain setting (#704919) |
initscripts-9.03.27-1.el6_2.1.src [1.5 MiB] |
Changelog
by Lukas Nykryn (2012-02-22):
- support ipv6 routing rules (#789056) |
initscripts-9.03.27-1.el6.src [1.5 MiB] |
Changelog
by Petr Lautrbach (2011-10-07):
- use restorecon -F for /dev and /dev/pts (#743222) |
initscripts-9.03.23-1.el6.src [1.5 MiB] |
Changelog
by Petr Lautrbach (2011-04-19):
- netfs: don't print errors if mdadm isn't installed. (#696110) |
initscripts-9.03.17-1.el6_0.1.src [1.5 MiB] |
Changelog
by Petr Lautrbach (2010-12-06):
- Allow 0 as a vlan tag. (#635360) |