General
In the General section, you can select default settings for saving documents, and can select default file formats.
Load
Load user-specific settings with the document
Loads the user-specific settings saved in a document with the document.
If Load user-specific settings with the document is not selected, the following user-specific settings still apply:
-
Settings available in File - Print - Options,
-
Name of Fax,
-
Spacing options for paragraphs before text tables,
-
Information about automatic updating for links, field functions and charts,
-
Information about working with Asian character formats.
The following settings are always loaded with a document, whether or not this option is marked:
-
Data source linked to the document and its view.
Printeri sÀtted laaditakse koos dokumendiga
Kui sĂ€te on lubatud, laaditakse printeri sĂ€tted koos dokumendiga. See vĂ”ib pĂ”hjustada dokumendi printimise printerisse, mis pole saadaval, kui sa ei vaheta printimise dialoogis kĂ€sitsi printerit. Kui sĂ€te on keelatud, kasutatakse dokumendi printimiseks sĂŒsteemi vaikeprinterit. Aktiivse printeri sĂ€tted salvestatakse koos dokumendiga sĂ”ltumata sellest, kas sĂ€te on lubatud vĂ”i keelatud.
Save
Edit document properties before saving
Specifies that the Properties dialog will appear every time you select the Save As command.
Always create backup copy
Saves the previous version of a document as a backup copy whenever you save a document. Every time LibreOffice creates a backup copy, the previous backup copy is replaced. The backup copy gets the extension .BAK.
To change the location of the backup copy, choose LibreOffice - PreferencesTools - Options - LibreOffice - Paths, and then enter a new path for the backup file.
Save AutoRecovery information every
Specifies that LibreOffice saves the information needed to restore all open documents in case of a crash. You can specify the saving time interval.
Minutes
Specifies the time interval in minutes for the automatic recovery option.
Automaatselt salvestatakse ka dokument
MÀÀrab, et koos automaattaastamise teabega salvestab LibreOffice ka kÔik avatud dokumendid. Intervall on sama mis automaattaastamise puhul.
Save URLs relative to file system
This option allows you to select the default for relative addressing of URLs in the file system and on the Internet. Relative addressing is only possible if the source document and the referenced document are both on the same drive.
A relative address always starts from the directory in which the current document is located. In contrast, absolute addressing always starts from a root directory. The following table demonstrates the difference in syntax between relative and absolute referencing:
Examples |
File system |
Internet |
relative |
../images/img.jpg |
../images/img.jpg |
absolute |
file:///c|/work/images/img.jpg |
http://myserver.com/work/images/img.jpg |

The Help tip always displays an absolute path. However, if a document is saved in HTML format, LibreOffice will enter a relative path if the appropriate check box is selected.
Select this box for relative saving of URLs in the file system.
Save URLs relative to internet
Select this box for relative saving of URLs to the Internet.
Vaikimisi failivormingu ja ODF-i sÀtted
ODF-vormingu versioon
OpenOffice.org 3 and StarOffice 9 introduce new features which have to be saved using the OpenDocument format (ODF) version 1.2. The prior versions of OpenOffice.org 2 and StarOffice 8 support the file formats ODF 1.0/1.1. Those prior file formats cannot store all new features of the new software.
Praegused LibreOffice'i versioonid oskavad avada dokumente ODF 1.0/1.1 ja 1.2 vormingus.
Dokumentide salvestamiseks vÔid mÀÀrata ODF-i versiooni 1.2, 1.2 laiendatud variandi vÔi varasema 1.0/1.1.

Hetkel lubab ODF 1.2 laiendatud variant mÀrkusi Draw' ja Impressi failides. Tarkvara viimastes versioonides saab neid lisada, valides
. MÀrkustega joonistuse vÔi esitluse avamisel tarkvara varasemates versioonides lÀhevad mÀrkused kaotsi.MÔned firmad vÔi organisatsioonid vÔivad nÔuda ODF-dokumente spetsiifiliselt ODF 1.0/1.1 vormingus. Vajadusel vÔid selle loendikastis valida. See vanem vorming ei luba aga salvestada kÔiki uusi vÔimalusi, nii et kui vÔimalik, on soovitatav kasutada ODF 1.2 laiendatud vormingut.
ODF-i vormingu versioon "1.2 laiendatud (ĂŒhilduvusreĆŸiim)" on tagasiĂŒhilduvam variant versioonist "1.2 laiendatud". See kasutab vĂ”imalusi, mis on ODF 1.2-s iganenuks kuulutatud ja arvestab OpenOffice.org-i vanemate versioonide vigadega. See vorming vĂ”ib olla kasulik, kui on vaja vahetada ODF-dokumente kasutajatega, kes kasutavad vana tarkvara, mis toetab ainult tavalist ODF 1.2 versiooni vĂ”i mĂ”nda vanemat ODF-i versiooni.
Hoiatamine, kui ei salvestata ODF-vormingusse vÔi vaikevormingusse
Selle valimisel nĂ€idatakse hoiatusteadet, kui salvestad dokumendi vormingusse, mis pole ei OpenDocument ega SĂ€tete akna jaotises Laadimine ja salvestamine - Ăldine mÀÀratud vaikevorming.
You can choose which file format will be applied as the default when saving documents of various document types. If you always exchange your documents with other persons who use Microsoft Office, for example, you may specify here that LibreOffice only uses the Microsoft Office file formats as a default.
Document type
Specifies the document type for which you want to define the default file format.
Always save as
Specifies how documents of the type selected on the left will always be saved as this file type. You may select another file type for the current document in the Save as dialog.